Filter
Top Products
Before Operation
26
4 Self-Test Mode
In this mode, self-test printing is performed. With this test printing, you can check the current
printer configuration settings and print quality. After loading the paper and ribbon, operate the
printer as follows:
1. Press and hold the Feed key while turning the printer on.
When label paper is used: Hold down the Feed key for two (2) seconds and the printer will feed
the paper and print samples 1 and 2 and stop.
When continuous paper is used: Hold down the Feed key for four (4) seconds and the printer
will feed the paper and print samples 1 and 2 and stop.
ROM version No.
Date and time
ROM checksum
RAM check
Communication setting
Print mode
Media sensor voltage
Head rank and resistance value
Peeling sensor
Auto-cutter
Ribbon sensor
Total travel distance
Sample 1