Filter
Top Products
Chapter 3 Paper and Ribbon
37
4 Paper Setting
The printer is designed for easy loading of paper. Open the printer cover and set the paper as
follows:
1. Push down the open lever to open the print head.
2. Push down the open guide lever to lift the open guide up.
3. Attach the roll guide to the roll holder and insert this in the hole of the roll paper. Set the
roll holder with the roll paper and guide on the paper holder and push this against the
left-side wall so that the roll paper is positioned in its deepest position.
Using paper gap
adjustment sensor
Using paper gap
adjustment sensor
Using black line
adjustment sensor
Direction of paper feed
2.5mm 104.0mm (11.5mm)
Left margin Printable area Right margin
Printable area