Filter
Top Products
Before Operation
24
3 Printer Setup Mode
In this mode, the print mode, optional equipment ON/OFF and sensor selections are set
up. Control keys function in the following. The printer configuration settings are stored in
memory so they are maintained even after the power is turned off.
Example
Changing the paper gap sensor to the black line sensor
1. First check the printer goes ON LINE, then press and hold the Pause key and then press the
Feed key and release both keys.
2. Change the print mode (direct-thermal or thermal transfer printing) to the sensor selection
with the Pause key.
Pressing these keys
simultaneously places the
printer into printer setup mode.
Returns to normal
operating mode.
Selects the mode item.
Selects the mode.