Clevo D480V Laptop User Manual


 
Disassembly
Removing the Inverter 2 - 29
2.Disassembly
Removing the Inverter
1. Turn off the computer and remove the battery (page 2 - 8), HDD (page 2 - 9), memory (page 2 - 10), CD device
(page 2 - 12), Bluetooth module (page 2 - 14), WLAN module (page 2 - 15), processor (page 2 - 16), keyboard
and center cover (page 2 - 18), LCD assembly (page 2 - 19) and top case module (page 2 - 21).
2. Remove screws (and any rubber covers) - from the front of the LCD assembly.
3. Run your finger around the middle of the frame to carefully unsnap the LCD front panel module .
4. Remove screw from the inverter, then turn over the inverter and disconnect cables & .
5. Lift the inverter up off the LCD assembly.
1 6
7
8
Figure 22
Inverter Removal
a. Remove the screws.
b. Remove the front panel
module.
c. Remove the screw on
the inverter.
d.Turn the inverter over
and disconnect the ca-
bles.
e. Remove the inverter.
7. Display Front Pan-
el Module
11. Inverter Module
•7 Screws
9
10
11
a.
1 2
b.
7
3 4
5
6
8
c.
d.
e.
9 10
11