Filter
Top Products
Disassembly
2 - 12 Removing and Installing a Processor
2.Disassembly
Processor Installation Procedure
1. Insert the CPU , pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!), and turn
the release latch towards the lock symbol (Figure 8b).
2. Remove the sticker (Figure 8c) from the heat sink.
3. Insert the heat sink
as indicated in Figure 8c.
4. Tighten the CPU heat sink screws in the order
to and to (the order as indicated on the label and Fig-
ure 8d).
5. Replace the component bay cover and tighten the screws (see page 2 - 6).
A
B
C
D
1
4
5
8
c.
b.
d.
B
A
a.
C
D
1
3
2
4
Note:
Tighten the screws in
the order as indicated
on the label.
C
5
6
8
7
Figure 8
Processor
Installation
a. Insert the CPU.
b. Turn the release latch to-
wards the lock symbol.
c. Remove the sticker from
the heat sink and insert
the heat sink.
d. Tighten the screws.
A. CPU
D. Heat Sink
•8 Screws