Filter
Top Products
Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone: 201-825-7400 Fax: 201-825-8133
Email: sales@codamount.com www.codamount.com
Cold-Mount ® is a registered trademark of Coda Inc.
Cold-Mount® Laminator Operation Manual January 2006
Basic Cold
-
Mount
®
Procedure
(continued)
Figure 16
Use hand tension to wrap the print
around the top roller. Make sure
there are no gaps between the print
and the roller.
Figure 17
Peel off the release liner. Run the
print and the substrate through the
laminator, taking care not to let the
print flop down on the adhesive.
Figure 18
Always keep an even tight tension
on the print to avoid any wrinkling.
The print will come out perfectly
mounted.