Filter
Top Products
Coda, Inc. • 30 Industrial Avenue • Mahwah, NJ 07430 Phone: 201-825-7400 Fax: 201-825-8133
Email: sales@codamount.com www.codamount.com
Cold-Mount ® is a registered trademark of Coda Inc.
Cold-Mount® Laminator Operation Manual January 2006
Roller Alignment Procedure
Figure 9
Any time you raise and lower the top roller
you must have the lines facing the same
direction. Example- When you turn the knob
on the right 3 times you must also turn the
knob on the left 3 times so the lines point in
the same direction.
This procedure will assure even application
of pressure by the top roller.
Figure 10
Look at the top of the laminator and notice
the position of the WHITE LINE
on top of the
gap adjusting knobs. At this point they
should be very close to pointing in the same
direction. Now adjust them so they are
completely aligned (pointing in the same
direction).