Filter
Top Products
United States January 2, 2003
Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice | Preface | Home | Product Description | Troubleshooting | Illustrated Parts Catalog
Removal & Replacement Procedures | Specifications | Connector Pin Assignments | Battery Pack
Service Considerations
Listed below are some of the considerations that you should keep in mind
during the disassembly and assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
● Torx T-9 screwdriver
● 3/16-inch and 7/32-inch nut drivers (for screw locks and standoffs)
● Small, standard screwdriver
● Small, Phillips screwdriver
● Diagnostics software
● Service Kit
Screws
The screws used in the computer are not interchangeable. If an incorrect
screw is used during the reassembly process, it can damage the unit. Compaq
strongly recommends that all screws removed during disassembly be kept
with the part that was removed, then returned to their proper locations.
IMPORTANT:
As each subassembly is removed from the computer, place it away from the
work area to prevent damage to the subassembly.
Return to Removal & Replacement Procedures.
privacy statement
legal notices