Filter
Top Products
http://h18000.www1.hp.com/athome/support/msgs/305/pccardr.html
United States December 9, 2002
Presario 305 Model
Before You Begin Specifications Parts Catalog
Removal Sequence Troubleshooting Battery Operations
Product Description Pin Assignments
Index
Removing the PC Card Assembly
Removal
Sequence
Serial Number
Location
Preparing for
Disassembly
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Multi-media
Expansion
Unit
Battery Pack
Hard Drive
Modem Card
RTC Battery
Keyboard
Memory Board
Switch Cover
Display Panel
Deck
Voltage
Converter
Board
Modem
Connector
Board
PC Card
PC Card
Assembly
System Board
1. Remove the
modem card.
2. Remove
the
keyboard.
3.
Remove
the switch
cover.
4. Remove
the display.
5. Remove
the deck.
6. Remove
the modem
connector
board.
7. Remove the
two silver (t8)
screws on the
left side of the
PC card
assembly.
8. Remove the
black (t8)
screw that
secures the
front of the PC
card assembly
to the base
assembly.
9. Lift up on
the left side of
the PC card
assembly to
disconnect the
assembly from
the system
board.
NOTE:
Be sure
to route
the
audio
and light
board
cables
between
the PC
card
assembly
and the
base
plastic.
Do not
route
near the
heat
sink.
privacy and legal statement
http://h18000.www1.hp.com/athome/support/msgs/305/pccardr.html [12/9/2002 2:19:31 PM]