Filter
Top Products
Wake Time
An IT administrator can use the Wake Time screen to schedule product wakeups on a daily basis.
For example, the product can be set to wake up at 07:30, so the product has finished initializing and
calibrating and is ready to use by 08:00. The administrator sets only one wakeup setting per day;
however, each day can have a different wakeup setting. Additionally, to save energy, the sleep delay
can be set to turn the product off after a specific period of inactivity.
Figure 3-12 Wake Time screen
Table 3-10 Wake Time
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and
menus
For more information, see Navigating through the HP Embedded Web Server.
2 Wake Time Select one or more days on which to use the wakeup setting, and then set the
time the product is turned on each day.
3 Sleep Delay Set the amount of time the product is idle before it goes into Sleep Mode. When
the product is in Sleep Mode, it uses less energy.
46 Chapter 3 Configuring the product from the Settings screens ENWW
Settings