Filter
Top Products
Removal and replacement procedures
Maintenance and Service Guide 4–31
26. If it is necessary to replace the webcam module cable, release the tabs 1 built into the display enclosure
shielding.
27. Remove the webcam module cable 2. The webcam module cable is included in the Display Cable Kit, spare
part number 538463-001.
28. If it is necessary to replace the wireless antenna transceivers and cables, remove the Phillips PM2.5×4.0
screws 1 that secure the transceivers to the display enclosure.
29. Release the transceivers 2 from the display enclosure. The transceivers are attached to the enclosure with
double-sided tape.
30. Release the tabs 3 built into the display enclosure shielding.
31. Remove the wireless antenna transceivers and cables 4. The wireless antenna transceivers and cables are
included in the Display Cable Kit, spare part number 538463-001.
Reverse this procedure to reassemble and install the display assembly.