Filter
Top Products
Computer Setup
Maintenance and Service Guide 5–5
System Configuration Menu
✎
Some of the listed System Configuration options may not be supported by your computer.
Select To do this
Language Change the Computer Setup language.
Boot Options ■ Set a Startup Menu delay (in seconds).
■ Enable/disable Custom Logo (disabled by default).
■ Enable/disable Display Diagnostic URL (enabled by default).
■ Enable/disable CD-ROM boot (enabled by default).
■ Enable/disable SD Card boot (enabled by default).
■ Enable/disable floppy boot (enabled by default).
■ Enable/disable PXE Internal NIC boot (disabled by default).
■ Set the Express Boot Popup delay in seconds.
■ Set the boot order.
Device Configurations ■ Enable/disable USB legacy support (enabled by default). When
enabled, USB legacy support allows the following:
❐ Use of a USB keyboard in Computer Setup even when
a Windows operating system is not running.
❐ Startup from bootable USB devices, including a hard drive,
diskette drive, or optical drive connected by a USB port to the
computer.
■ Enable/disable fan always on while connected to an AC outlet
(disabled by default).
■ SATA (Serial Advanced Technology Attachment) device mode. The
following options are available:
❐ AHCI (Advanced Host Controller Interface)
❐ IDE (Integrated Drive Electronics)
✎
Availability of the options above varies by computer model.
■ Enable/Disable Unified Extensible Firmware Interface (UEFI) mode
(disabled by default).
(Continued)