Filter
Top Products
Configuring Your Notebook
4-13
Continued
Feature Settings Comments
Resume On Time Off*
On
When this option is set to On and Suspend
Mode is set to Suspend to RAM, the system
wakes the system up at the time defined in
Resume Time.
Resume on Time will not work
when the Suspend Mode is set to Save to
Disk.
Resume Time Enter resume time:
hour, minute, second
format.
This option sets the time that the system will
wake up from Suspend. Resume On Time must
be set to On in order for the system to wake at
the defined time.
Resume Date Enter resume date:
month, day, year
format.
This option sets the date that the system will
wake up from Suspend. Resume On Time must
be set to On in order for the system to wake on
the defined date.
*Factory default setting
Boot Menu
Enter the Boot Menu to change the order in which devices will be searched for an operating
system.
Feature Settings Comments
Summary Screen Disabled*
Enabled
This option allows you to view a system
configuration screen during bootup.
QuickBoot Mode Disabled
Enabled*
When set to Enabled, this option reduces the time
required to complete POST by allowing the system
to test only the major system components.
Boot Device
Priority
Submenu This option allows you to define the drive boot
sequence. To change the order, move the
highlighted cell to the field to be moved. Press [F5]
to move the field to a lower priority. Press [F6] to
move the field to a higher priority.
Default priority:
1. [Diskette Drive]
2. [Removable Devices]
3. [Hard Drive]
4. [ATAPI CD-ROM Drive] (or DVD Drive)
*Factory default setting