Filter
Top Products
Memory Upgrades
5-3
4. Align the notch in the 3.3v SDRAM memory module with the plastic tab in the memory
cradle (Figure 5-2, step 1).
5. Install the memory module by inserting it at an angle of approximately 45 degrees into
one of the two sockets (Figure 5-2, step 2).
6. Gently press the module down until it snaps into place (Figure 5-2, step 3).
7. Replace the memory compartment cover and press around the edges to make sure it is
properly seated.
DEC01609
Figure 5-2 Installing Memory