Filter
Top Products
Troubleshooting
6-8
Problem Possible Cause Action
SRAM card
does not work
(single beep).
Missing device driver(s). Refer to the operating system’s on-line help for
information on configuring SRAM PC Cards.
SRAM card
does not work
(double beep).
Incorrect drive letter
assigned.
SRAM card not
formatted.
Refer to operating system’s on-line help.
To format the SRAM card, insert the card in a PC
Card slot, then double-click My Computer, then
select SRAM drive, then choose File from the menu
bar, then choose the Format option, then select the
Full format option and click [Run].
If the problem persists, call your Compaq service
representative.
ATA card does
not work
(single beep).
Card not supported. Contact your Compaq service representative.
ATA card does
not work
(double beep).
Missing device driver(s).
Unformatted ATA card
The PC Card Wizard will detect the missing device
drivers and load them.
Refer to the operating systems on-line help for
information on troubleshooting PC Cards.