Compaq 6500 Family Laptop User Manual


 
Regulatory Notices
C-5
Battery Notice
________________________ WARNING __________________________
This computer contains two internal batteries: a lithium coin cell
real time clock battery and a nickel metal hydride bridge battery
pack. There is a risk of explosion and injury if the batteries are
incorrectly replaced or improperly handled. Do not attempt to
recharge, disassemble, immerse in water, or dispose of them in
fire. Replacement should be done by a Compaq authorized service
provider using the Compaq spare part for this computer.
This computer contains a lithium ion battery pack. There is a risk
of fire and chemical burn if the battery pack is handled
improperly. Do not disassemble, crush, puncture, short external
contacts, dispose in water or fire, or expose it to temperatures
higher than 60ºC (140ºF). Replace only with the Compaq battery
pack for this computer.
____________________________________________________________
_______________ Battery Recycling and Disposal _________________
In North America, dispose of nickel metal hydride or lithium ion
batteries by taking advantage of the Compaq battery recycling
program. You will be provided with a postage-paid battery pack mailer
preaddressed to a reclamation facility where the metals are recycled.
Call the telephone number listed for your location in Appendix B for
more information.
In Europe, do not dispose of batteries with general household waste.
Dispose of or recycle them by using the public collection system or
returning them to Compaq, your authorized Compaq partners, or their
agents.
____________________________________________________________
Power Cords
If you were not provided with a power cord for your computer or for an AC power
accessory intended for use with your computer, you should purchase a power cord that is
approved for use in your country.
The power cord must be rated for the product and for the voltage and current marked on the
product’s electrical ratings label. The voltage and current rating of the cord should be