Filter
Top Products
6.4.6. DateTime
Click the DateTime item in the left column to setup time and date for your camera,
providing correct information for the remote users who might be thousands of miles
away from the camera’s location.
- Date & Time:
You can set up time and date manually or automatically by
selecting the Synchronized with Time Server option.
- Synchronized with Time Server:
Select this option and the time will be based
on GMT setting. The time will be
synchronized every 10 minutes. When
selecting this option, you have to enter the
required information in the following fields:
IP Address
Enter the IP Address of the Time Server in this box.
Protocol Two options of NTP or Time are available for your selection
to link with the Time Server. The default setting is NTP.
TimeZone
Select the time zone for the region from the pull-down menu.
Set Manually: Select this option to set the time manually. The system
administrator must enter the date and time in the respective
field manually.