Filter
Top Products
To select a computer:
1. Navigate to the desired computer line.
2. Press Enter. The selected computer is accessed. An confirmation label appears showing which
computer is accessed.
Note! When the OSD is displayed you cannot select computers using the front panel Select buttons
or the keyboard hotkeys.
20. The OSD settings (F2)
Press F2. The OSD Settings window appears see Figure 9.
Figure 9 The Settings window
Note! When the OSD is password protected (explained below) only the Administrator has
access to the F2 settings window.
21. The General settings
With the blue line on the word GENERAL, press Enter. The General settings window appears see
Figure 10.
Figure 10 The General Settings window
From this window you can do the following:
Security
The OSD comes with an advanced password security system that contains 3 different security
levels. Each security level has different access rights to the system.
These levels are as follows: