Filter
Top Products
Figure 11 Ports Settings window
Editing the computer name
In this window you can edit the computer names with up to 15 characters.
To erase a character:
Select it and press the Space bar. Blank spaces remain in place of the erased character.
To erase an entire line:
Place the cursor at the beginning of the line. Keep the Space bar depressed until the line is erased.
Keyboard (KB)
The CAT5 KVM operates with Windows, Linux, HP UX, Alpha UNIX SGI, DOS, Novell, MAC,
USB or Open VMS.
By default the keyboard mode is set to PS for Intel based computers.
For the other systems set the KB column as follows:
• U1 for HP UX
• U2 for Alpha UNIX, SGI, Open VMS
• U3 for IBM AIX
Adding/changing a hotkey (HKEY)
Cascade the CAT5 KVM by connecting another Multi-Platform CAT5 KVM to a Computer port
instead of a computer, and then connecting more CIMs to the second Switch. Connect a third and
fourth Switch in the same way. With the CAT5 KVM 16 Port model, connect up to up to 256
computers through cascading.
You must define a hotkey to display the OSD of each Switch. These hotkeys must be different for
the top and bottom layers. The hotkeys can be any of the choices as set out above on page 14.
To add/change a hotkey:
1. On the line to which the Switch is connected, press Tab to jump to the HKEY column.
2. Toggle between the options using the Space bar.
24. The Time settings