Filter
Top Products
CRADLEPOINT CBR450| USER MANUAL Firmware ver. 3.3.0
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 81
7.4 Load Balance (Advanced Mode only)
When enabled in Connection Manager (Internet → Connection Manager), the router will use multiple WAN interfaces
to increase the data transfer throughput by using any connected WAN interface consecutively. Connections are load
balanced between interfaces based on a dynamic measurement of bandwidth available.
Leave ―Use default rates‖ selected for automatically defined bandwidth values for Load Balance.
The default minimum rate can be changed to
reflect the minimum bandwidth used during
dynamic measurement. The dynamic
measurement will assume that the interface
has at least the specified minimum
bandwidth available. You have the ability to
set these minimum rates for:
4G Modem
3G Modem