Filter
Top Products
Crestron iServer™ Network Audio Server Crestron CEN-ISERVER
4. Configure Crestron Sync:
a. Run the application (Launch the Finder, Go to Applications, then
double-click Crestron Sync icon).
b. Right-click (or Command + left-click) the application icon located in
the Dock.
c. Click Open at Login.
d. If the “Add New Device” window is not automatically displayed upon
starting Crestron Sync for the first time, right-click inside the “Crestron
Sync” window and click Add New Device.
e. Enter a name for the device, e.g., My iServer.
If the device name is changed while connected to iTunes, this will
disconnect the iPod. To re-connect, select the device and click Connect
Selected.
f. Enter the IP address of the Crestron iServer. For details, refer to
“Establishing Communication” on page 18.
g. Do not select the Automatically Connect check box. This control
allows the user to select the Crestron device connection each time they
start iTunes. If the check box is selected Crestron Sync will connect the
device automatically each time iTunes starts or Crestron Sync starts.
h. Click OK to add the device to the “Crestron Sync” window.
5. To add devices, re-open the “Add New Device” window and configure the
additional devices as described above.
For more information, refer to the latest version of the Crestron iServer™ Network
Audio Server QuickStart Guide (Doc. 6760) which is available from the Crestron
website or the Crestron Sync help file.
14 • Crestron iServer™ Network Audio Server: CEN-ISERVER Operations Guide – DOC. 6759B