Filter
Top Products
Multimedia Presentation System 300 Crestron MPS-300
Setup
Network Wiring
When wiring the network, consider the following:
• Use Crestron Certified Wire.
• Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results or damage
to the equipment. Please use the Crestron Power Calculator to help calculate
how much power is needed for the system
(
http://www.crestron.com/calculators).
Cresnet
For networks with 20 or more devices, use a Cresnet Hub/Repeater (CNXHUB) to
maintain signal quality.
For more details, refer to “Check Network Wiring” on page 86.
Ethernet
The MPS-300 can also use high-speed Ethernet for communications between the
device and a control system, computer, digital media server and other IP-based
devices.
For information on connecting Ethernet devices in a Crestron system, refer to the
latest version of the Crestron e-Control
®
Reference Guide (Doc. 6052), which is
available for download from the Crestron website.
CAT5 Wiring
Category 5 (CAT5) wiring is a twisted pair cable designed for Ethernet networks.
These networks operate at speeds of up to 100 Megabits per second (Mbps) using the
100BaseT standard. Crestron takes advantage of this specification for a variety of
video applications.
Crestron recommends using CresCAT, CresCAT-D or CresCAT-Q wiring solutions.
The following chart shows the maximum recommended cable lengths for various
signal formats.
Recommended Maximum Cable Lengths for Video via Crestron Certified Wire
FORMAT MAXIMUM DISTANCE
Composite 500 feet
S-video 500 feet
Component 500 feet
For more information, refer to the latest version of the Crestron CAT5 Wiring
Reference Guide (Doc. 6137).
22 • Multimedia Presentation System 300: MPS-300 Operations Guide – DOC. 6529B