Filter
Top Products
Crestron TPS-12G/15G/17G-QM Isys
®
G-Series Touchpanels
Video Setup
These touchpanels can display two fully scalable and movable, full motion video
windows, each supporting standard video, HDTV and high-resolution RGB signals
from external AV and computer sources. These units use auto-detect for composite,
S-video or component RGBHV. They support SDTV (NTSC and PAL), EDTV,
HDTV and RGB (VGA) up to UXGA (1600 x 1200). Two video inputs provide for
connectivity to QuickMedia. You can perform Auto Detect by touching QM Audio
1 or QM Audio 2 or manually choose Video, S-Video, Component or RGB as an
input source. Black and white can also be enabled for either video channel.
A table describing the video menu controls follows the illustrations. Touching Video
on the SETUP MENU will open the screen shown below. From here you can enter
the setup screens for both Video 1 and Video 2 by touching their respective buttons.
VIDEO SETUP
Refer to the following table for additional VIDEO SETUP menu details.
Video Setup Details
VIDEO SETUP
SCREEN
CONTROL
DESCRIPTION
QM Audio 1 Detects the presence of QM Audio on channel 1.
QM Audio 2 Detects the presence of QM Audio on channel 2.
Setup Video 1
Displays the VIDEO 1 SETUP menu. By default, the VIDEO
1 SETUP menu displays video controls: Brightness,
Contrast, Saturation and Hue on the right side of the menu.
Video
Pressing this before pressing the Setup Video 1 button will
open the VIDEO 1 SETUP menu in Video mode.
(Continued on following page)
Operations Guide – DOC. 6415B Isys
®
G-Series Touchpanels: TPS-12G/15G/17G-QM • 41