Filter
Top Products
Crestron TPS-12G/15G/17G-QM Isys
®
G-Series Touchpanels
VIDEO 1 SETUP (RGB Size & Position shown)
Refer to the following table for additional VIDEO 1 SETUP details.
Video 1 Setup Details – Video, S-Video, Component and RGB
VIDEO 1 SETUP
SCREEN
CONTROLS
DESCRIPTION
QM Signal Indicates the presence of a QM signal.
Video Preset
Displays the current Video Preset number. Saved presets
can also be called up using this control. The – and +
buttons decrement and increment the displayed value.
Load Preset Will load the selected Video Preset.
Store Preset
Will store any changes you have made to the video setup at
the displayed preset number.
Restore Default
Color Settings
Returns the video settings to their factory defaults.
Color Control
When Video, S-Video or Component is selected as the
video type, these controls are available. The Restore
Default Color Settings button places the controls at their
midpoint.
Brightness
1, 2
Adjusts video image brightness with the – and + buttons.
Contrast
1, 2
Adjusts video image contrast with the – and + buttons.
Saturation
3
Adjusts video image saturation with the – and + buttons.
Hue
3
Adjusts video image hue with the – and + buttons.
Red
1, 2
Adjusts the amount of red in the video signal. Available
when the RGB Color button is selected.
Green
1, 2
Adjusts the amount of green in the video signal. Available
when the RGB Color button is selected.
(Continued on following page)
Operations Guide – DOC. 6415B Isys
®
G-Series Touchpanels: TPS-12G/15G/17G-QM • 43