Filter
Top Products
CYRAQ™ 21 CyberResearch
®
Displays
4.1.2 USB Cable Connection
1. Shutdown your computer.
2. Plug the USB cable into the CYRAQ’s USB connector on the back of the
enclosure.
3. Plug the other end of the USB cable into a free USB port on the back of the
computer.
4.1.3 Touchscreen Driver Installation
1. Reboot your computer.
2. After Windows loads, put the CyberResearch Software and Utilities CD into the
CD drive.
Figure 34: Splash Screen
3. When the splash screen appears (Figure 34) click on Install Drivers
48 ©Copyright 2005 CyberResearch, Inc