Filter
Top Products
CyberResearch
®
Displays CYRAQ™ 21
4.2.4 Calibration Test
This is the last screen displayed in the calibration process.
1. Touch the screen and notice if the calibration target is displayed under your finger
or stylus. If the target appears directly under your finger, select the “Accept”
button.
2. If the target does not appear directly beneath your finger or stylus, select the
“Cancel” button, reconfigure your calibration options and recalibrate until you get
an acceptable calibration. You may adjust the “Offset”, or try a different
calibration scheme.
3. Select “Accept” to apply and record your calibration data.
4. Select “Cancel” to return to the calibration tab. Once you return to the calibration
tab, select, “OK” or “Apply” to save your settings.
5. If you have multiple monitors return to the “Screen Selection” tab and select
another monitor to calibrate.
Figure 37: Calibration Target
CyberResearch, Inc. 55
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com