Filter
Top Products
REFERENCES
131
5
5.9 CONFIGURATION COPYING COMMANDS
5.9.1 Copy GRYPHON
D-Series
Procedure:
Connect the
master
(correctly configured reader) and the
slave
(reader to be
configured) together through two RS232 serial interface cables and external
power supply. Accessory cables and power supply are available from your
Datalogic distributor to provide this connection.
RS232 Cables: CAB363 & CAB364
or CAB320 & CAB328
Power Supply: PG5
Using the
slave
reader, read the Restore Default barcode and then the RS232
interface barcode from chapter 4 of this manual or from the Quick Reference
Manual.
With the
master
reader, read the Configuration Copy barcode below.
Copy Configuration
i;;k
i;;k
i;;k
$+ZZ0$-
The configuration will be copied from the master to the slave reader. The slave
reader signals the end of the procedure with a series of beeps.
Note:
The master reader can be configured for any interface.