CONFIGURATION
15
4
4.4.1 Using Multiple M-Series Readers With Same Cradle
If you want to use several M-Series readers with the same OM-GRYPHON™ cradle,
you must first Bind the cradle with one of the readers (see previously described
configuration procedure).
Successive readers
can be associated with the same cradle by following the
configuration procedure substituting the Bind command with Join (step 5).
5.
Join
i3//k
i3//k
i3//k
The green LED on the GRYPHON™ M will blink: the reader is ready to be
positioned onto the cradle. Complete step 6.
END of procedure.
CAUTION
If the cradle is not Bound to a reader, its address assumes a
random value which can cause conflicts and malfunctions to
other cradles within its range.
YOUR READER IS NOW READY TO READ BARCODES.
To change the defaults see par. 4.7.