27
3 Command Enhancements
And Differences
For more information on SOH command functionality, refer to the Bi-
Directional Communications section on page 41.
SOH # - Reset
This command resets the printer. Resetting the printer returns all settings to
default and clears both the communications and printing buffers. The
command also clears the internal RAM memory.
(Not supported.)
SOH *- Reset
This command resets the printer. Resetting the printer returns all settings to
default and clears both the communications and printing buffers. The
command also clears the internal RAM memory.
(Not supported.)
SOH A - Send ASCII Status String
This command allows the host computer to check the current printer status.
The printer returns a string of eight characters to the host, followed by a
carriage return. Each character is either a ‘Y’ or ‘N’ indicating that the
associated condition is true (Y) or false (N). Byte 1 is the first character
transmitted by the printer. See <SOH>F.
(Not supported.)
SOH B - Toggle Pause
This command toggles the printer’s paused state on and off. (This is the same
function achieved when pressing the PAUSE button on the printer. (
Not
supported)
SOH C - Stop/Cancel
This command performs the same function as pressing the STOP/CANCEL
button on the printer’s front panel. This function clears the current label format
from the print buffer, pauses the printer, and illuminates the pause/stop
indicator.
(Not supported.)
SOH D - SOH Shutdown
The internal firmware architecture no longer requires the execution of an
“SOH” shutdown for binary downloading.
(Obsolete command.)