E-3202/Cash Drawer Printer 5
3.0 Introduction
This chapter explains how to connect your printer and load media.
3.1 Connecting the Printer
1. Connect the Communication Cable’s mini-DIN connector to the printer and
the other end (DB9S) to the host.
Warning: DO NOT connect a mouse or other peripheral equipment to this connector.
2. Connect the cash drawer cable (not supplied) to the printer and the other end
to the cash drawer.
Warning: DO NOT connect this printer to any type of telephone line or equipment.
3. Connect the one end of the power supply to the back of the printer and the
other end to a properly grounded outlet.
Once the power supply has been connected the printer will automatically power
up. To remove power simply disconnect the power supply from the printer.
**Cash Drawer & Cash Drawer Cable are not supplied**