Filter
Top Products
E-3202/Cash Drawer Printer 19
4.4 Connecting to an ESC POS Terminal
The default configuration of your printer is ESC/POS. Check your
Terminal communication parameters and change the printer settings to
match your terminal settings.
Default Communication parameters
Speed: 9600 baud
Data: 8 bits
Parity: None
Control: Hardware
To check the current emulation and communication parameters of your
printer:
1. Make sure that a roll of paper is loaded.
2. Set the printer to “Off”.
3. Press both buttons simultaneously until the configuration is printed.
If the configuration is not correct see section 4.4 Changing the Default
Settings.