Back to Contents Page
Internal Card With Bluetooth®Wireless Technology
Dell™Inspiron™1011ServiceManual
Removing the Bluetooth Card
Replacing the Bluetooth Card
If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.
Removing the Bluetooth Card
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the keyboard (see Removing the Keyboard).
4. Remove the palm rest (see Removing the Palm Rest).
5. Remove the hard drive (see Removing the Hard Drive).
6. Remove the palm rest bracket (see Removing the Palm Rest Bracket).
7. Push the card out of the Bluetooth card compartment in the palm rest bracket.
Replacing the Bluetooth Card
1. Place the card in the Bluetooth card compartment and snap it into place.
2. Replace the palm rest bracket (see Replacing the Palm Rest Bracket).
3. Replace the hard drive (see Replacing the Hard Drive).
4. Replace the palm rest (see Replacing the Palm Rest).
5. Replace the keyboard (see Replacing the Keyboard).
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
Bluetooth card
2
Bluetooth card compartment