Filter
Top Products
9. Disconnect the power button cable, Bluetooth card cable, power/battery status light cable, and speaker cable from their respective system board
connectors.
10. Carefully lift the palm rest bracket along the rear edge, near the hinge brackets, then gently lift the palm rest bracket to remove it from the computer.
Replacing the Palm Rest Bracket
1. Place the palm rest bracket on the computer base and snap it into place.
2. Replace the four screws that secure the palm rest bracket.
3. Connect the power button cable, Bluetooth card cable, power/battery status light cable, and speaker cable to their respective system board connectors.
4. Replace the hard drive (see Replacing the Hard Drive).
5. Replace the palm rest (see Replacing the Palm Rest).
6. Replace the keyboard (see Replacing the Keyboard).
7. Replace the five screws that secure the palm rest bracket to the computer base.
1
power button cable connector
2
palm rest bracket
3
Bluetooth cable connector
4
speaker cable connector
5
power/battery status light cable connector