Dell 1011 Laptop User Manual


  Open as PDF
of 42
 
Back to Contents Page
Camera
Dell™Inspiron™1011ServiceManual
Removing the Camera
Replacing the Camera
Removing the Camera
1. Follow the instructions in Before You Begin.
2. Remove the display bezel (see Removing the Display Bezel).
3. Remove the screw that secures the camera to the display cover.
4. Disconnect the camera cable from the connector.
5. Remove the camera board.
Replacing the Camera
1. Connect the camera cable to the connector.
2. Align the screw hole on the camera board with the screw hole on the display cover.
3. Replace the screw that secures the camera to the display cover.
4. Replace the display bezel (see Replacing the Display Bezel).
Back to Contents Page
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on the back of the computer).
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
camera
2
screw
3
camera cable connector
 previous next