Filter
Top Products
9. Lift the keyboard off the palm rest.
Replacing the Keyboard
1. Slide the keyboard cable into the connector on the system board and press down the keyboard cable locks on the system board connector.
2. Align the four tabs on the keyboard to the slots on the palm rest bracket.
3. Place the keyboard on the palm rest bracket.
4. Turn the computer over and replace the three screws that secure the keyboard to the computer base.
5. Replace the battery (see Replacing the Battery).
Back to Contents Page
1
keyboard tabs (4)
2
keyboard cable connector
3
pull-tab
4
keyboard cable locks (2)