Filter
Top Products
Replacing the Keyboard
1. Replace the keyboard on the palm rest.
2. Align the keyboard shield over the screw holes on the palm rest.
3. Replace the ten screws that secure the keyboard and the shield to the palm rest.
4. Connect the backlit keyboard cable (availability varies according to region) to the connector.
5. Connect the multimedia board cable and power board cable to their connectors.
6. Connect the dual multimedia board/power board cable to the connector.
7. Replace the palm rest (see Replacing the Palm Rest).
Back to Contents Page
3
keyboard shield
4
screws (10)
5
keyboard
6
dual multimedia board/power
board cable connector
7
backlit keyboard cable connector
(availability varies according to region)
NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time- consuming to replace. Be careful when removing and handling the
keyboard.