176 Adding and Replacing Parts
3
Replace the memory module cover and tighten the three screws.
4
Insert the battery into the battery bay or connect the AC adapter to your
computer and an electrical outlet.
5
Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
To confirm the amount of memory installed in the computer:
•
In the Microsoft
®
Windows
®
XP operating system,
right-click the My
Computer icon on your desktop. Click
Properties
→
General
.
•In the
Microsoft Windows Vista
™ operating system, click the Windows
Vista Start button , and right-click
Computer
→
Properties
.
Modem
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1
Follow the procedures in "Before You Begin" on page 163.
2
Turn the computer over, loosen the three captive screws on the modem
cover, and then remove the cover.
3
Remove the screw securing the modem to the system board.
1 tab 2 notch 3 memory module
1
3
2
