Filter
Top Products
178 Adding and Replacing Parts
Subscriber Identity Module
Subscriber Identity Modules (SIM) identify users uniquely through an
International Mobile Subscriber Identity.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTE: Only GSM (HSDPA) type cards need a SIM. EVDO cards do not use a SIM.
1
Follow the procedures in "Before You Begin" on page 163.
2
In the battery bay, locate the SIM compartment at the base.
3
Slide in the SIM into the compartment with the cut-off corner of the card
aligning with the cut-off corner in the SIM compartment.
Wireless Mini-Cards
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To help prevent damage to the system board, you must remove the battery
from the battery bay before you begin working inside the computer.
1 battery bay 2 SIM card
1 2