Filter
Top Products
140 Adding and Replacing Parts
Replacing the Hinge Cover
1
Replace the media control buttons connector to the systemboard.
2
Insert the left edge of the hinge cover.
3
Press from left to right until the cover snaps into place.
4
Replace the two screws that secure the hinge cover from the battery bay.
Keyboard
For more information about the keyboard, see "Using the Keyboard and
Touchpad" on page 39.
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the
battery from the battery bay before you begin working inside the computer.
1 hinge cover 2 scribe
1
2