Filter
Top Products
4-20 Dell PowerEdge 4100/180 and 4100/200 Systems Service Manual
Microprocessor and Heat Sink
Figure 4-20. Microprocessor Configuration
The computer may have two microprocessors. To remove a microprocessor and
heat sink, follow these steps:
1. Remove the microprocessor securing clip from the microprocessor/heat
sink assembly.
Press down on the folded part of the clip with a small screwdriver to release
the clip (see Figure 4-21).
WARNING: The microprocessor chip can get extremely hot during
system operations. Be sure the chip has had sufficient time to cool
before touching it.
microprocessor
socket
front tab
clip
thermal pad
(bonded to heat sink)
microprocessor
pin-1 corner of socket
heat sink