Filter
Top Products
178 Appendix
Boot Sequence
This feature allows you to change the boot sequence for devices.
Option Settings
•
Diskette Drive —
The computer attempts to boot from the floppy drive. If
the floppy disk in the drive is not bootable, if no floppy disk is in the drive,
or if there is no floppy drive installed in the computer, the computer
generates an error message.
•
Hard Drive
— The computer attempts to boot from the primary hard
drive. If no operating system is on the drive, the computer generates an
error message.
•
CD Drive
— The computer attempts to boot from the CD drive. If no CD
is in the drive, or if the CD has no operating system, the computer
generates an error message.
Onboard LAN Boot
ROM
Enabled or Disabled (Disabled by default)
SATA Mode IDE; RAID; AHCI (IDE by default)
Power Management Setup
ACPI Suspend Type S1(POS); S3(STR) (S3(STR) by default)
Quick Resume Disabled; Enabled (Disabled by default)
Remote Wake Up On; Off (On by default)
USB KB Wake-Up
From S3
Enabled; Disabled (Disabled by default)
Auto Power On Enabled; Disabled (Disabled by default)
Auto Power On Date 0
Auto Power On Time 0:00:00
AC Recovery Off; On; Former-Sts (Off by default)
book.book Page 178 Thursday, June 14, 2007 6:23 PM