Filter
Top Products
Removing and Installing Parts 85
Media Card Reader
For information about using the Media Card Reader, see "Using a Media Card Reader (Optional)" on
page 18.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your
body before you touch any of your computer’s electronic components. You can do so by touching an unpainted
metal surface on the computer chassis.
Removing a Media Card Reader
1
Follow the procedures in "Before You Begin" on page 61.
2
Remove the CD/DVD drive (see "Removing a CD/DVD Drive" on page 81).
3
Remove the hard drive (see "Removing a Hard Drive" on page 76).
4
Disconnect the interface cable from the back of the Media Card Reader and from the Media Card
Reader connector on the system board (see "System Board Components" on page 65).
1 interface cable 2 Media Card Reader connector
1
2