Filter
Top Products
92 Removing and Installing Parts
3
Attach the interface cable to the system board (see "System Board Components" on page 65).
4
Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
5
Replace the CD/DVD drive (see "Installing a CD/DVD Drive" on page 83).
6
Replace the computer cover (see "Replacing the Computer Cover" on page 96).
NOTICE: To connect a network cable, first plug the cable in to the network device and then plug it in to the
computer.
7
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
8
Enter system setup (see "System Setup" on page 101) and select the appropriate
Diskette Drive
option.
9
Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on
page 52).
1 cable release tab 2 interface cable edge connector 3 interface cable
2
3
1