Filter
Top Products
Menu item Description
Paper Source
Tray <x>
MP Feeder
Manual Paper
Manual Envelope
Specifies the paper source selected to supply paper for the printer to print from the
flash drive
Collate
Off (1,1,1,2,2,2)
On (1,2,1,2,1,2)
Stacks the pages of a print job in sequence when printing multiple copies
Notes:
• Off is the factory default setting. No pages will be collated.
• The On setting stacks the print job sequentially.
Sides (Duplex)
1 sided
2 sided
Enables duplex printing (two-sided printing)
Duplex Binding
Long Edge
Short Edge
Defines the way duplexed pages are bound and how the printing on the back of
the page is oriented in relation to the printing on the front of the page
Notes:
• Long Edge is the factory default setting.
• Long Edge specifies that binding be placed on the left edge of portrait pages
and the top edge of landscape pages.
• Short Edge specifies that binding be placed on the top edge of portrait pages
and the left edge of landscape pages.
Orientation
Auto
Portrait
Landscape
Specifies the orientation of the print job
Note: Auto is the factory default setting.
N-up (pages/side)
Off
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
Specifies that multiple-page images be printed on one side of a sheet of paper.
This is also referred to as Paper Saver.
Notes:
• Off is the factory default setting.
• The number selected is the number of page images that will print per side.
N-up Border
None
Solid
Prints a border around each page image when using N-up
Note: None is the factory default setting.
N-up Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Specifies the positioning of multiple-page images when using N-up
Notes:
• Horizontal is the factory default setting.
• Positioning depends on the number of images and whether the images are in
portrait or landscape orientation.
Understanding printer menus
214