Filter
Top Products
12 Setting Up and Using Your Computer
www.dell.com | support.dell.com
Attaching and Removing the Computer Stand
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
NOTE: Place your computer on a soft surface to prevent scratching the top cover.
To attach the stand:
1
Rotate the computer to an upside-down position.
2
Insert the screw into the bottom of the stand.
3
Align the two tabs and the screw on the stand with the tab holes and screw hole in the bottom
of the computer.
tabs (2)
tab holes (2)
screw
screw hole