Filter
Top Products
Loading Paper
Dell 7330 Mono Laser Printer
4-17
5. Push the tray completely into the printer.
6. If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a. Select
Change setup, and then press the OK button.
b. Select the paper type, and then press the OK button.
c. Select the paper size, and then press the OK button to save your selection.
7. In the printer driver, select either the paper type or the tray you loaded as the paper source.
Loading Paper in Tray 6 for Single-Sided Printing
Use Tray 6 as a high capacity feeder for Letter, A4, Executive, and B5 JIS paper. Paper can
only be loaded long-edge feed in Tray 6.
1. Pull out the tray.
7330-032
7330-112