Filter
Top Products
Printing on Specialty Media
Dell 7330 Mono Laser Printer
4-40
Printing Envelopes from the Optional Envelope Tray
Caution: Insert the Envelope Tray in the slot for Tray 2 only. Inserting the Envelope Tray in
any other tray slot will damage it.
Auto Sense should never be selected in the Tray 2 size menu when the Envelope Tray is in the
printer because it does not auto-sense any size.
1. Insert the envelopes in the Envelope Tray:
■ Place Monarch, #10, A6, C5, DL, Large US Postcard, and custom-sized envelopes
long-edge feed in the tray.
■ Place the side to be printed faceup.
■ Place the envelope with the flap entering the printer first (left side of tray).
2. Adjust the paper guides to the size of the envelopes.
3. If prompted on the control panel, press the OK button to accept the paper size and type
that are shown. If you have changed the paper size or type, do the following:
a. Select
Change setup, and then press the OK button.
b. For Monarch, #10, C5, and DL envelopes select
Envelope, and for A6 and Large US
Postcard paper select the appropriate paper type. Press the OK button.
c. Select the paper size, and then press the OK button to save your selection. For
information on printing envelopes in sizes not listed in the menu, see Printing on
Custom Size Paper on page 4-45.
4. In the printer driver, select Envelope as the paper type or Tray 2 as the paper source.
7330-203