Dell 745N Personal Computer User Manual


  Open as PDF
of 89
 
4. Click AppleTalk Protocol, and then click Disable.
Configuring the AppleTalk Protocol
To configure the AppleTalk protocol, perform the following steps:
1. Log in to the NAS Manager.
2. Click Shares.
3. Click Sharing Protocols.
4. Click AppleTalk Protocol, and then click Properties.
5. In the AppleTalk Service Properties window, type the log on message that will be displayed when the user logs on, click the Security check box if you
allow workstations to save passwords and select the type of authentication to be used, and specify the number of concurrent sessions that are
allowed.
6. Click OK to complete the configuration.
Adapter Bindings
SFM can bind to only one network adapter. By default, it is bound to the embedded 10/100 network adapter. To change the binding in systems with multiple
network adapters, the AppleTalk protocol properties for the network adapter to be used by AppleTalk must be modified to accept inbound connections.
AppleTalk Protocol Adapter Binding
To modify the AppleTalk protocol adapter binding for systems with multiple network adapters, perform the following steps from the NAS Manager:
1. Log in to the NAS Manager.
2. Click Network.
3. Click Interfaces.
4. Click the radio button next to an enabled adapter to bind the AppleTalk protocol.
5. On the Tasks menu, click AppleTalk.
6. Click the check box next to Enable inbound AppleTalk connections on this adapter.
7. Optionally, if you use AppleTalk zones, select the appropriate zone in the drop-down box.
8. Click OK.
Microsoft UAM Volume
A user authentication module (UAM) is a software program that prompts users for an account name and password before they log in to a server. The
Macintosh Chooser has a standard UAM built in that uses the clear-text password or Apple's RandNum Exchange method of security.
Microsoft Authentication offers an additional level of security because the password is used as a key to encrypt a random number. If the system administrator
has determined that encryption is an important security measure, you may be asked to use Microsoft Authentication in addition to Microsoft UAM
authentication.
Requirements
TouseMicrosoftUAM5.01,youmusthaveaMacintoshclientrunningAppleShareClient3.8orlaterorMacintosh8.5orlateroperatingsystem.Ifyoudonot
meet the minimum requirements, the Microsoft UAM Installer installs the old Microsoft UAM 1.0 module. If you upgrade your system software, you need to run
the Microsoft UAM Installer again.
NOTE: The AppleTalk protocol must bind to an adapter that is enabled, regardless of whether the File Server for Macintosh is disabled.
 previous next