Filter
Top Products
Using the Operator Panel
Turn on your computer and printer, and make sure they are connected.1.
Load your original document into the ADF. For more information, see Loading Original Documents.2.
Use the right right Arrow button to scroll to Scan, and then press the Select button .3.
Use the right right Arrow button to scroll to Scan To, and then press the Select button .4.
If your printer is connected locally:
The printer downloads the application list from the computer.a.
5.
Use the left and right Arrow buttons to scroll through the available applications to
which your scan to be sent.
When the application you want to use appears on the display, press the Select button .b.
If your printer is connected to a network:
NOTE: This printer can only be attached to a network using a Dell Network Adapter (sold separately).
Use the left and right Arrow buttons to scroll through the available computers to which
you want your scan to be sent.
a.
When the computer you want to scan to appears on the display, press the Select button .b.
If the computer has a PIN number associated with it, use the keypad to enter the four-digit PIN.c.
NOTE: This can be found in the upper-right corner of the Dell All-In-One Center main page. For more
information, see Using the Dell All-In-One Center. The PIN is not required by default; it is only
requested if the PIN has been set.
Press the Select button .d.
Press the Start button .6.
The printer scans all pages loaded in the ADF. When all pages in the ADF are scanned, a single file
containing all scanned pages is created in the selected application.
Using Your Computer
Turn on your computer and printer, and make sure they are connected.1.
2.
3.