Filter
Top Products
Connect a phone cord from the FAX connector ( - left side connector) on the printer to the
telephone wall jack.
1.
Remove the protective plug from the PHONE jack connector ( - right side connector).2.
Connect a phone cord from the computer modem to the PHONE jack connector ( - right side
connector).
3.
Connect a phone from the computer modem to a telephone.4.
NOTE: If the phone communication is serial in your country (such as Germany, Sweden, Denmark,
Austria, Belgium, Italy, France, and Switzerland), you must remove the blue plug from the PHONE jack
connector ( - right side connector), and insert the supplied yellow terminator for your fax to work
correctly. You will not be able to use this port for additional devices in these countries.
What if I Have a Digital Subscriber Line (DSL)?
DSL delivers digital data to a computer through a telephone line. Your printer is designed to work with
analog data. If you are faxing over a telephone line connected to a DSL modem, install a DSL filter to avoid
interference with the analog fax modem signal.
NOTE: ISDN (integrated services digital network) and cable modems are not fax modems and are not
supported for faxing.
Connect the DSL filter to an active telephone line.1.
Connect the printer directly to the output of the DSL filter.2.